Atlaspool Florida Series Pre-Filter Pump Single-Phase

Atlaspool Florida Series single-phase pool pump provides powerful, quiet, and reliable water circulation for all systems from villas to commercial pools thanks to its pre-filtered structure and high-efficiency motor.

Call Us
WhatsApp Support
Categories:
Share:

Atlaspool Florida Series Pre-Filter Pump (Single-Phase)

Atlaspool Florida Series Pre-Filter Pool Pump is a powerful pump model that delivers high efficiency for both private and commercial pools with its single-phase (220V) operating system. With its durable body, quiet operation, and pre-filter chamber, it helps keep pool water continuously clean and clear. Thanks to its energy-saving structure and long-lasting motor, it is one of the most reliable components of pool circulation systems.

General Features

  • Single-phase (220V) operating system: Provides easy installation for residential and small commercial pools.
  • Pre-filtered structure: Captures leaves, sand, and large particles before the pump to protect the motor.
  • Durable motor: Long-lasting, high-efficiency, and quiet operation.
  • Atlaspool assurance: Delivers high performance and long service life in pool systems.
  • 2-Year Warranty: Covered under manufacturer warranty.

Usage and Start-Up Recommendations

  • Suction and discharge line connections must be made with diameters suitable for the pump.
  • Before the pump is started for the first time, the pre-filter chamber must be completely filled with water.
  • The pump must never be operated without water.
  • During initial start-up, the outlet valve should first be kept closed or half-closed, then fully opened within 5 seconds to allow the pump to reach operating speed.
  • Suction valves must not be closed during operation.
  • Water must not reach the motor section and the environment must not be humid.
  • Adequate airflow must be provided for the cooling fan located at the rear of the motor; otherwise, overheating may cause malfunction.
  • Maximum velocity should be 1.5 m/s for suction lines and 2.5 m/s for discharge lines.
  • Suction height above 3 meters is not recommended unless necessary.

Areas of Use

Compatible with villas, private swimming pools, small-scale commercial pools, and all pool types with filtration and circulation systems.

Additional Information

Alternative models with different power ratings and special versions can be supplied upon request.

Code Product Type Kg/Unit Package Size Flow Rate (9 mWS)
ATS POM043 0.50 HP Atlaspool Pre-Filter Pump (Single-Phase) 8,5 0,21 x 0,60 x 0,35 12 m3/h
ATS POM044 0.75 HP Atlaspool Pre-Filter Pump (Single-Phase) 8,8 0,21 x 0,60 x 0,35 14 m3/h
ATS POM045 1.00 HP Atlaspool Pre-Filter Pump (Single-Phase) 10,35 0,21 x 0,60 x 0,35 17 m3/h
ATS POM046 1.50 HP Atlaspool Pre-Filter Pump (Single-Phase) 11,45 0,21 x 0,60 x 0,35 21 m3/h